Designed to be used with horizontal rods - just hook on in desired position. Quick and easy to change your display - simply slide your posters in and out. Material: 2mm thick clear acrylic with polished edges. Dimensions : A5: 148mm wide x 210mm high. A4: 210mm wide x 297mm high. A3: 297mm wide x 420mm high. A2: 420mm wide x 594mm high....

A4 cold cathode lightbox using the very latest light technology, making it incredibly lightweight. The lamp life is 50,000 hrs (approximately 5 years). Supplied with a 3 pin plug. Stylish slim click frame 30 x 30mm with a overall depth of 35mm. Low energy and economical. Brightness of 2000 lux. ...

Dimensions: 15mm long, 10mm diameter. Material: Brass. Click here to view a larger image of this product ...

Ideal for creating eye catching header panels. Can be locked at any angle. Use this fitting for panels wider than the distance between cables. Holds panel from the edge. Dimensions: 52mm long, 16mm diameter. Material: Brass. ...

Acrylic pocket with 4 x CG03 panel clamps in satin chrome. Fits A4 landscape kits with a distance between cables of 331mm. Ideal for creating high impact signs/messages. Materials: A4 Pocket: 2mm thick acrylic. Panel clamps: Brass with satin chrome finish. Dimensions: A4 paper size 297mm w x 210mm h. Clamp size: 15mm long, 10mm diameter. All prices are subject to a flat rate delivery ...

Excellent value complete display kits! Easy to move around. Easy to change. Quick and easy to order, set-up and maintain. Supplied with full assembly instructions. Kit includes: - 1 x A4 portrait acrylic pocket - 2 x A4 portrait acrylic dispensers - 10mm rods - Small round base Subject to our flat-rate delivery charge of £12.50 (UK mainland only) ...

Multi-position support for panels up to 7mm thick. For use with 6mm diameter rods. Ideal for creating eye catching header panels. Can be locked at any angle. Holds panel from the edge. Use this fitting for panels wider than the distance between rods....

Single upright with 3 x A4 hook-on portrait pockets on each side, ideal for use in reception areas, exhibition stands and information points. Each pocket hooks onto a 6mm diameter rod, making your posters quick and easy to change. Supplied complete with 6 x R230 6mm rods, 6 x REC end caps and 6 x RS-Q rod fittings. Dimensions: Unit 1980mm high, base 330mm wide. A4 portrait paper size: 210mm ...

Designed to be used with wall mounted horizontal rods - just hook on in desired positon. Quick and easy to change your display - simply slide your posters in and out. Supplied with 3mm thick triangular back support to angle the shelf away from the wall. Material: 2mm thick clear acrylic with polished edges. Dimensions : A4 landscape: 297mm wide x 210mm high. A4 portrait: 210mm wide x 297mm ...

Light diffusion technology makes ultra-slim Xtralite extra bright, which combined with the frameless look creates a unique floating appearance. Light passes through the panel from both top and bottom, giving a completely even spread of light which eliminates shadows. Low-voltage Xtralite is cool running with an invisible power supply, so no ugly wires. Supplied complete with 2 x CA4 4m cables ...

Click here to view a larger image of this product ...

The most economical shelf support. Support positioned inconspicuously underneath shelf. Shelf can be easily lifted off the cables for cleaning. Dimensions: 8mm deep, 16 mm diameter. Material: Brass. ...

Acrylic pocket with 4 x CG03 panel clamps in satin chrome. Fits A4 portrait kits with a distance between cables of 331mm. Ideal for creating high impact signs/messages. Materials: A4 Pocket: 2mm thick acrylic. Panel clamps: Brass with satin chrome finish. Dimensions: A4 paper size 297mm w x 210mm h. Clamp size: 15mm long, 10mm diameter. All prices are subject to a flat rate delivery ...

Excellent value complete display kits! Easy to move around. Easy to change. Quick and easy to order, set-up and maintain. Supplied with full assembly instructions. Kit includes: - 1 x A4 portrait acrylic pocket - 3 x A4 portrait acrylic dispensers - 10mm rods - Small round base Subject to our flat-rate delivery charge of £12.50 (UK mainland only) ...

Multi-position support for shelves up to 10mm thick. Can be locked at any angle. ...

Single upright with 3 x A4 portrait pockets on each side, ideal for use in reception areas, exhibition stands and information points. Each pocket is held in position with two WM04 clamps with AT toggles (included), and the pocket height is fully adjustable. The pockets are made from high impact 3mm acrylic to increase durability in public areas. Dimensions: Unit 1980mm high, base 330mm wide. ...

Keeps wall mounted pockets hanging vertically. Use when WM11 supports are fitted to the wall. Supplied with double-sided adhesive. Material: Acrylic. Dimensions: 2mm thick, 28mm high. ...

Light diffusion technology makes ultra-slim Xtralite extra bright, which combined with the frameless look creates a unique floating appearance. Light passes through the panel from both top and bottom, giving a completely even spread of light which eliminates shadows. Low-voltage Xtralite is cool running with an invisible power supply, so no ugly wires. Supplied complete with 4 x R1500 1.5m ...

Dimensions: 32mm long, 16mm diameter. Material: Brass. ...

Simply create a key hole and drop sign into place. Ideal for signs which are wider than the cable centres. An extremely economical solution as your sign can be suspended with only two supports. Fitting has a small ridge to ensure sign sits securely. Dimensions: 17mm long, 16mm diameter. Material: Brass. ...

Acrylic pocket with 4 x CG03 panel clamps in satin chrome. Fits A5 landscape kits with a distance between cables of 331mm. Ideal for creating high impact signs/messages. Materials: A4 Pocket: 2mm thick acrylic. Panel clamps: Brass with satin chrome finish. Dimensions: A4 paper size 148mm w x 210mm h. Clamp size: 15mm long, 10mm diameter. All prices are subject to a flat rate delivery ...

Multi-position support for panels up to 7mm thick. For use with 6mm diameter rods. Ideal for creating eye catching header panels. Can be locked at any angle. Use this fitting for panels wider than the distance between rods. Holds panel from the edge....

Round profile solid aluminium frame (two uprights and two horizontals). Two circular feet 330mm diameter. 1 x A2 poster holder with 2 shelves below. 6 x A4 acrylic shelves with lip at front to hold a stack of brochures. All quick fit cables and clamps included. Unit supplied flat packed, but is easy to assemble. Overall dimensions: 1980mm high x 1500mm wide. Quantity discounts available, ...

For use on the top of easy access pockets. Material: clear acrylic. ...

Dimensions: 20mm long, 20.5mm diameter. Material: Brass. ...

For wooden or glass shelves. Can be locked to any angle of slope. Wooden shelves can be secured with a wood screw, not supplied. For glass shelves add boss ref. P08. Dimensions: 37mm long, 16mm diameter. Material: Brass. ...

Acrylic pocket with 4 x CG03 panel clamps in satin chrome. Fits A5 portrait kits with a distance between cables of 331mm. Ideal for creating high impact signs/messages. Materials: A4 Pocket: 2mm thick acrylic. Panel clamps: Brass with satin chrome finish. Dimensions: A4 paper size 148mm w x 210mm h. Clamp size: 15mm long, 10mm diameter. All prices are subject to a flat rate delivery ...

Multi-position support for panels up to 10mm thick. For use with 6mm diameter rod. Can be locked at any angle. ...

Designed to be suspended from the top. Quick and easy to change your display - simply slide your posters in and out. Material: 2mm thick clear acrylic with polished edges. Remember to order the correct panel clamps with your acrylic pockets. ...

Flexi-frame kit consisting of 2 frames with a hinge that folds flat. Each frame contains 2 x quick fit cables, 1 x A1 acrylic pocket with 8 x CG01 supports. Ideal for use on reception areas, exhibition stands and museums. Leaflet dispensers can be positioned under the pockets to hold A4, A5 or 1/3 A4 brochures. Dimensions: Each frame 850 mm wide x 1900 mm high with a flat profile. Materials: Profile: ...

The most economical shelf support. Support positioned inconspicuously underneath shelf. Shelf can be easily lifted off the cables for cleaning. Dimensions: 8mm deep, 16 mm diameter. Material: Brass. Click here to view a larger image of this product ...

Dimensions: 24.5mm long, 16mm diameter. Hole size 6mm diameter. Material: Brass. ...

Sign support for panels up to 7mm thick. Ideal for suspending signs with 0.5 metre length of rod. Supports sign from the side. Non removable fitting. ...

Two part pocket with a fixed back panel in foamex, which screws directly to the wall. Hook-on acrylic front creates a frameless poster display that is flat against the wall with no visible fixing. No tools required to change the poster. Material: Clear acrylic with polished edges...

Flexi-frame kit consisting of 3 frames with a hinge that folds flat. Each frame contains 2 x quick fit cables, 1 x A1 acrylic pocket with 8 x CG01 supports. Ideal for use on reception areas, exhibition stands and museums. Leaflet dispensers can be positioned under the pockets to hold A4, A5 or 1/3 A4 brochures. Dimensions: Each frame 850 mm wide x 1900 mm high with a flat profile. Materials: Profile: ...

Can be locked at any angle. Dimensions: 27mm long, 16mm diameter. Material: Brass. ...

Can be locked at any angle. Dimensions: 28mm long, 18mm diameter. Material: Brass. ...

Single-sided for panels up to 3mm thick with holes. For use with 6mm diameter rods. Simply create a key hole and drop sign into place. Ideal for signs which are wider than the rod centres. An extremely economical solution as your sign can be suspended with only two supports. Fitting has a small ridge to ensure sign sits securely....

Two part pocket with a fixed back panel in foamex, which screws directly to the wall. Hook-on acrylic front creates a frameless poster display that is flat against the wall with no visible fixing. No tools required to change the poster. Material: Clear acrylic with polished edges. ...

Acrylic leaflet dispensers (single sided) with 4 x CG03 panel clamps in satin chrome. Fits A1 portrait kits with a distance between cables of 628mm. Materials: Dispensers: 4mm thick acrylic back panel, 3mm thick acrylic front section. Panel clamps: Brass with satin chrome finish. Dimensions: KADLA1 2 x A4 Portrait Leaflet Dispenser takes A4 paper size 210mm w x 297mm h. KADMA1 3 ...

Click here to view a larger image of this product ...

Simply create a key hole and drop sign into place. Ideal for signs which are wider than the cable centres. An extremely economical solution as your sign can be suspended with only two supports. Fitting has a small ridge to ensure sign sits securely. Dimensions: 24mm length, 16mm diameter. Material: Brass. ...

Double-sided hook for panels up to 3mm thick with holes. For use with 6mm diameter rods. Simply create a key hole and drop sign into place. Ideal for signs which are wider than the rod centres. An extremely economical solution as your sign can be suspended with only two supports. Fitting has a small ridge to ensure sign sits securely....

Designed to be used with horizontal rods - just hook on in desired position. Holds A4 portrait leaflets. Material: 3mm thick clear acrylic with polished edges. Dimensions: 357mm high, 235mm wide, 45mm deep. ...

Perfect for restaurants, or anywhere wishing to convey information stylishly and effectively! Material: 2mm thick acrylic Dimensions: MA5PF-D: 148mm wide x 220mm high, holds A5 leaflets MA4PF-D: 210mm wide x 307mm high, holds A4 leaflets All prices are subject to a flat rate delivery charge of £12.50 (UK mainland only) ...

Can be locked at any angle. Dimensions: 27mm long, 18mm diameter. Material: Brass. Click here to view a larger image of this product ...

Can be locked at any angle. Dimensions: 46mm long, 18mm diameter. Material: Brass. ...

Multi-position support for 6mm diameter rod. Can be locked at any angle. Ideal for creating creative signage and dramatic displays with a strong image....

Can be locked at any angle. Dimensions: 46mm long, 18mm diameter. Material: Brass. ...

For wooden or glass shelves. Can be locked at any angle. Wooden shelves can be secured with a wood screw, not supplied. For glass shelves add retaining screw ref PO8. Dimensions: 64mm long, 16mm diameter. Material: Brass. ...

The most economical shelf support. Support positioned inconspicuously underneath shelf. Shelf and support are non-removable. Shelf requires a 10mm diameter hole. ...

For any item fitted with boss ref. P02. Dimensions: 18mm long, 12mm internal diameter, 6mm internal depth, 16mm diameter. ...

These excellent value complete display kits, are quick and easy to order, set-up and maintain! Supplied with full assembly instructions. Kit includes: Special round 50mm profile freestanding frame. Special hook-on A4 acrylic pockets. Dimensions: 460mm wide x 1000mm high All prices are subject to a flat rate delivery charge of £12.50 (UK mainland only) ...

These excellent value complete display kits, are quick and easy to order, set-up and maintain! Supplied with full assembly instructions. Kit includes: Special round 50mm profile freestanding frame. Special hook-on A4 acrylic pockets. Dimensions: 460mm wide x 1000mm high All prices are subject to a flat rate delivery charge of £12.50 (UK mainland only) ...

Dimensions: 38.5mm long, 16mm diameter. Hole size 6mm diameter. Material: Brass. ...

For any item fitted with boss ref: P02. Dimensions: 21mm long, 12mm internal diameter, 6mm internal depth, 16mm diameter. ...

These excellent value complete display kits, are quick and easy to order, set-up and maintain. Supplied with full assembly instructions. Kit includes: Special round 50mm profile freestanding frame. Special hook-on A4 acrylic pockets. Dimensions:460mm wide x 1980mm high All prices are subject to a flat rate delivery charge of £12.50 (UK mainland only) ...

Dimensions: 20mm long, 16mm diameter. Material: Brass. ...

Flush finish, with a plastic insert to protect the glass. Use with shelf supports ref CS11-3 or CS21-3. Dimensions: screw 16mm diameter. Shelf requires a 6mm diameter hole, 12mm from the edge of the glass. Material: Brass. ...

Single-sided support for 6mm diameter rod. Use to position a horizontal 6mm diameter rod between two vertical rods. ...