Single upright with 3 x A4 portrait pockets on each side, ideal for use in reception areas, exhibition stands and information points. Each pocket is held in position with two WM04 clamps with AT toggles (included), and the pocket height is fully adjustable. The pockets are made from high impact 3mm acrylic to increase durability in public areas. Dimensions: Unit 1980mm high, base 330mm wide. ...

Keeps wall mounted pockets hanging vertically. Use when WM11 supports are fitted to the wall. Supplied with double-sided adhesive. Material: Acrylic. Dimensions: 2mm thick, 28mm high. ...

Dimensions: 32mm long, 16mm diameter. Material: Brass. ...

Simply create a key hole and drop sign into place. Ideal for signs which are wider than the cable centres. An extremely economical solution as your sign can be suspended with only two supports. Fitting has a small ridge to ensure sign sits securely. Dimensions: 17mm long, 16mm diameter. Material: Brass. ...

Ceiling to Floor Poster Kit A4 x 4 Column Kits. 4 column ceiling to floor hook-on poster kit with: - 4m long cables complete with top/bottom fixings. - 8 x A4 portrait double sided acrylic pockets. - 2 x 1m long horizontal rods per pair of pockets supported by CS09 double sided panel clamps in satin chrome. Rods are supplied with stylish silver REC end caps. Use in the window or interior ...

Acrylic pocket with 4 x CG03 panel clamps in satin chrome. Fits A5 landscape kits with a distance between cables of 331mm. Ideal for creating high impact signs/messages. Materials: A4 Pocket: 2mm thick acrylic. Panel clamps: Brass with satin chrome finish. Dimensions: A4 paper size 148mm w x 210mm h. Clamp size: 15mm long, 10mm diameter. All prices are subject to a flat rate delivery ...

Multi-position support for panels up to 7mm thick. For use with 6mm diameter rods. Ideal for creating eye catching header panels. Can be locked at any angle. Use this fitting for panels wider than the distance between rods. Holds panel from the edge....

Round profile solid aluminium frame (two uprights and two horizontals). Two circular feet 330mm diameter. 1 x A2 poster holder with 2 shelves below. 6 x A4 acrylic shelves with lip at front to hold a stack of brochures. All quick fit cables and clamps included. Unit supplied flat packed, but is easy to assemble. Overall dimensions: 1980mm high x 1500mm wide. Quantity discounts available, ...

For use on the top of easy access pockets. Material: clear acrylic. ...

Dimensions: 20mm long, 20.5mm diameter. Material: Brass. ...

For wooden or glass shelves. Can be locked to any angle of slope. Wooden shelves can be secured with a wood screw, not supplied. For glass shelves add boss ref. P08. Dimensions: 37mm long, 16mm diameter. Material: Brass. ...

Ceiling to Floor Poster Kit A4 x 4 Column Kits. 4 column ceiling to floor hook-on poster kit with: - 4m long cables complete with top/bottom fixings. - 12 x A4 portrait double sided acrylic pockets. - 2 x 1m long horizontal rods per pair of pockets supported by CS09 double sided panel clamps in satin chrome. Rods are supplied with stylish silver REC end caps. Use in the window or interior ...

Acrylic pocket with 4 x CG03 panel clamps in satin chrome. Fits A5 portrait kits with a distance between cables of 331mm. Ideal for creating high impact signs/messages. Materials: A4 Pocket: 2mm thick acrylic. Panel clamps: Brass with satin chrome finish. Dimensions: A4 paper size 148mm w x 210mm h. Clamp size: 15mm long, 10mm diameter. All prices are subject to a flat rate delivery ...

Multi-position support for panels up to 10mm thick. For use with 6mm diameter rod. Can be locked at any angle. ...

Designed to be suspended from the top. Quick and easy to change your display - simply slide your posters in and out. Material: 2mm thick clear acrylic with polished edges. Remember to order the correct panel clamps with your acrylic pockets. ...

Flexi-frame kit consisting of 2 frames with a hinge that folds flat. Each frame contains 2 x quick fit cables, 1 x A1 acrylic pocket with 8 x CG01 supports. Ideal for use on reception areas, exhibition stands and museums. Leaflet dispensers can be positioned under the pockets to hold A4, A5 or 1/3 A4 brochures. Dimensions: Each frame 850 mm wide x 1900 mm high with a flat profile. Materials: Profile: ...

The most economical shelf support. Support positioned inconspicuously underneath shelf. Shelf can be easily lifted off the cables for cleaning. Dimensions: 8mm deep, 16 mm diameter. Material: Brass. Click here to view a larger image of this product ...

Dimensions: 24.5mm long, 16mm diameter. Hole size 6mm diameter. Material: Brass. ...

Ceiling to Floor Poster Kit A4 x 4 Column Kits. 4 column ceiling to floor hook-on poster kit with: - 4m long cables complete with top/bottom fixings. - 16 x A4 portrait double sided acrylic pockets. - 2 x 1m long horizontal rods per pair of pockets supported by CS09 double sided panel clamps in satin chrome. Rods are supplied with stylish silver REC end caps. Use in the window or interior ...

Sign support for panels up to 7mm thick. Ideal for suspending signs with 0.5 metre length of rod. Supports sign from the side. Non removable fitting. ...

Two part pocket with a fixed back panel in foamex, which screws directly to the wall. Hook-on acrylic front creates a frameless poster display that is flat against the wall with no visible fixing. No tools required to change the poster. Material: Clear acrylic with polished edges...

Flexi-frame kit consisting of 3 frames with a hinge that folds flat. Each frame contains 2 x quick fit cables, 1 x A1 acrylic pocket with 8 x CG01 supports. Ideal for use on reception areas, exhibition stands and museums. Leaflet dispensers can be positioned under the pockets to hold A4, A5 or 1/3 A4 brochures. Dimensions: Each frame 850 mm wide x 1900 mm high with a flat profile. Materials: Profile: ...

Can be locked at any angle. Dimensions: 27mm long, 16mm diameter. Material: Brass. ...

Can be locked at any angle. Dimensions: 28mm long, 18mm diameter. Material: Brass. ...