A1 slim cold cathode lightbox using the very latest light technology, making it incredibly lightweight. The lamp life is 50,000 hrs (approximately 5 years). Supplied with a 3 pin plug. Stylish slim click frame 30 x 30mm with an overall depth of 35mm. Low energy and economical. Brightness of 2000 lux. Click here to view a larger image of this product ...

Holds 1/3 A4 portrait leaflets. Single-sided. ADSA2 has 4 x 1/3 A4 leaflet dispensers, and is used under A2 portrait posters. ADSA1 has 5 x 1/3 A4 leaflet dispensers, and is used under A1 portrait posters. This item can be purchased alone or as part of a kit with 4 x CG03 panel clamps. Material: 4mm thick acrylic back panel, 3mm thick acrylic front section. Dimensions: 260mm High ADSA2: ...

Double sided acrylic blades to hold cut A0 posters, with a side opening to easily change posters. Blades rotate 3 turns per minute, with a delay of 3 to 30 seconds. Delay can be adjusted on site and units have on/off switch. Supplied with power connectors, transformers, 3m rods and top/bottom rod fittings and supports. All units are supplied flat packed with assembly instructions. Installation ...

3m long cable supplied complete with wall to wall fixings. Use for suspending graphics, signage etc. Spring-loaded tensioner keeps cable taut and looking its best at all times. The cable is made of galvanised steel which means it will not fray, kink or mark easily. Dimensions: cable fixing projects 40mm from wall, fixing plates 38mm diameter. Fixings take up to no. 10 screw. Material: brass ...

Can be locked at any angle. Dimensions: 28mm long, 16mm diameter. Material: Brass. ...

Grab the attention of passers-by with Digital Screen Kits; a truly cost effective way to present digital media! Supplied with everything you need for installation. Kit includes: Ultra slim 53mm deep screen which simply clips onto rod system A3 17" LCD screen Compact demo card and with information Dimensions: 520mm wide x 400mm high. LCD Screen: 17inch diagonal. Specifications: ...

Excellent value complete display kits! Easy to move around. Easy to change. Quick and easy to order, set-up and maintain. Supplied with full assembly instructions. Kit includes: - 4 x A4 landscape acrylic pockets - 10mm rods - Small round base Subject to our flat-rate delivery charge of £12.50 (UK mainland only) ...

A highly economical solution to create powerful window and internal displays that are held in position with suction pads!. No installation required - just assemble and fix into position! Kit contains: 4 x A4 acrylic pockets 2 x rods 4 x clear suction pads Supports Full instructions All prices are subject to a flat rate delivery charge of £12.50 (UK mainland only) ...

Complete display kit - excellent value! Perfect for retail and exhibition displays. Quick and easy to order, set-up and maintain. Supplied with full assembly instructions. Installation service available. Kit includes: 2 x 4m galvanised steel cables 4 x wall mount fittings 3 x double A4 acrylic dispensers 12 x brass panel clamps with satin chrome finish Allen keys Additional ...

A2 Acrylic Pocket with wall mounts. A highly attractive way to present graphics and posters. Contains: 1 x A2 acrylic pocket (3mm thick) 4 x Chrome wall supports (25mm thick) All prices are subject to a flat rate delivery charge of £12.50 (UK mainland only) ...

Support for glass shelves up to 7mm thick. ...

Freestanding unit with 4 x A2 easy access acrylic pockets - ideal for use in retail outlets, banks, estate agents, museums, reception areas, exhibition stands and information points! Choose from a round or a flat profile. The unit is supplied with self assembly instructions, 3 x quick fit cables, 4 x A2 acrylic pockets, 8 x CG03 single-sided clamps and 4 x CG04 double-sided clamps. Dimensions: ...

Ideal for posters or literature. Easily interchangeable. The Kit consists of: 2 x A4-Double clear acrylic pocket(portrait or landscape - both shown). 2 x 4m long cables. Fixtures for ceiling to floor-mounting included. 8 x Satin chrome panel clamps. Cable centres: Portait 510mm. Extra easy access acrylic pockets available. We offer a discount per Kit for order of 3 Kits and above. ...

Wall mounted shelving kit with 2 x 3m long cables complete with wall to wall fixings, 2 x A1 narrow drilled and slotted glass shelves and 8 x CS01 supports in satin chrome. Position shelves at any height, use in the window or interior to create a stylish display. Increase the effectiveness by adding low-voltage lighting, acrylic poster pockets and leaflet dispensers. Quick and easy way to order ...

Grab the attention of passers-by with Digital Screen & Cold Cathode Light Box Kits! A truly cost effective way to present digital media. Supplied with everything you need for installation. The kit includes: 1 x Digital Screen Ultra slim 53mm deep screen simply clips onto rod system 17" LCD screen Supplied compact demo card & instructions on how to load information on the card 60 watts/12 ...

Keeps wall mounted pockets hanging vertically. Use when WM11 supports are fitted to the wall. Supplied with double-sided adhesive. Material: Acrylic. ...

Quick and easy to change your display -simply slide posters in and out. Material: 3mm thick (A4 & A5 2mm thick) clear acrylic with polished edges. Display centres: A5: cable centre 182mm, rod centre 186mm. A4: cable centre 244mm, rod centre 248mm. A3: cable centre 331mm, rod centre 335mm. A2: cable centre 454mm, rod centre 458mm. A1: cable centre 628mm, rod centre 632mm. A0: cable centre ...

A2 slim cold cathode lightbox using the very latest light technology, making it incredibly lightweight. The lamp life is 50,000 hrs (approximately 5 years). Supplied with a 3 pin plug. Stylish slim click frame 30 x 30mm with a overall depth of 35mm. Low energy and economical. Brightness of 2000 lux. ...

With 40mm lip and triangular back support. Material: 3mm thick clear acrylic with polished edges. Display centres: A4 portrait: cable centre 244mm, rod centre 248mm. A4 landscape: cable centre 331mm, rod centre 335mm. A3 landscape: cable centre 454mm, rod centre 458mm. ...

Double sided acrylic blades to hold cut A1 posters, with a side opening to easily change posters. Blades rotate 3 turns per minute, with a delay of 3 to 30 seconds. Delay can be adjusted on site and units have on/off switch. Supplied with power connectors, transformers, 4m cables and top/bottom cable fittings and supports. All units are supplied flat packed with assembly instructions. Installation ...

2m long cable with ceiling fixing and panel clamp to take up to 7mm thick panel. Ideal for supporting signs. The cable is made of galvanised steel which means it will not fray, kink or mark easily. Dimensions: top fixing 16mm diameter, panel clamp 23mm long. Fixing takes up to no. 10 screw. Material: brass fixing / panel clamp, galvanised steel cable. Weight loading: 120kg maximum (subject ...

Can be locked at any angle. Dimensions: 46mm long, 16mm diameter. Material: Brass. ...